Métier du bois

Showing all 14 results

(Français) ASPIFLEX-AS

(Français) COMPOSITION : EVA écrasable sans armature
Intérieur lisse
ASPIFLEX AS : antistatique

UTILISATIONS : Produits pulvérulents avec ambiance explosive.

PLPL-AS

COMPOSITION : Polyurethane film
Polyester
Anti-static
Thickness 0,4 mm
Coppered steel spiral

USES : Industrial and domestic ventilation.
Intake and discharge of air charged with solid residues, dust and fumes.
Great flexibility and very good strength.

PLPS

COMPOSITION : Polyurethane film
Polyether
Food grade
Thickness 1 to 1,6 mm
Coppered steel spiral

USES : Heavy-duty industrial ventilation.
Pneumatic transport of highly abrasive materials of large particle size, at high speeds for the circulation of solid wastes.
Particularly suitable for the equipment of industrial and agricultural machinery, the maintenance of green spaces, ground surfaces, highways, etc.
Suitable for the equipment of cereal and grape must hoppers, concrete and gravel plants.

PLP

COMPOSITION : Polyurethane film
Polyether
Food grade
Thickness 0,4 mm
Coppered steel spiral

USES : Moderately laden air.
Sawdust suction, wood shavings, granules, flours.
Hydrolysis and vapour resistance.

PLPR

COMPOSITION : Polyurethane double film
Polyether
Food grade
Thickness 0,8 mm
Coppered steel spiral

USES : Highly laden air.
Suction of wood shavings, cereals, granules, powders.
Hydrolysis and vapour resistance.

PLPS-X

COMPOSITION : Polyurethane film
Polyether
Food grade
Thickness 1,8 to 2 mm
Coppered steel spiral

USES : Heavy-duty industrial ventilation.
Transfer of fluid with an exceptionally high charge of solid particles.
Extreme abrasive stresses. Substantial pressure or negative pressure.
Discharge and intake of gravel or sand.
Equipment of agricultural machines for the transfer of grain, cereal hoppers and silage vehicles, loading and unloading installations.

PLPS-X ALX

COMPOSITION : Polyurethane profile
Polyester
Food grade and anti-static
Complies with the ATEX directive
Thickness 1,8 to 2 mm
Stainless steel spiral

USES : Transfer with high granulometry and high speed.
Transport of highly abrasive particles in the food industry, plastics and chemicals.
Use in ATEX zones.

PLPS ALX

COMPOSITION : Polyurethane profile
Polyester
Food grade and anti-static
Complies with the ATEX directive
Thickness 1 to 1,6 mm
Stainless steel spiral

USES : Transfer of abrasive food ingredients.
Transport of granules for industry, chemicals and plastics.
Use in ATEX zones.

PN

COMPOSITION : PVC film
Thickness 1 to 1,6 mm
Coopered steel spiral

USES : Industrial ventilation.
Extraction of dust with limited abrasive properties, ventilation of work stations.
Extraction of fumes or gas.
Public works.
Drainage of liquid under low pressure.
Extraction of acid vapours.

PLPR-AS

COMPOSITION : Polyurethane film
Polyether
Anti-static
Thickness 0,8 mm
Coppered steel spiral

USES : Industrial ventilation, air charged with solid particles.
Intake or discharge of highly abrasive particles, including sawdust, coarse grains, chips, granulates, construction dusts, paper and card waste, etc.

PLPL-ASM

COMPOSITION : Polyurethane film
Polyester
Anti-static
Thickness 0,4 mm
Crush-resistant coil reinforcement

USES : Industrial and domestic ventilation.
Intake and discharge of air charged with solid residues, dust, vapours and fumes.
Projection of rockwool, flocking.
Great flexibility and very good strength.

PCN

COMPOSITION : PVC film
Thickness 0,7 mm
Coopered steel spiral

USES : Industrial and domestic ventilation.
Middle abrasion, transport of product with low granulometry.
Fine dusts of light-weight materials, fumes, vapours.
Conveyance of products of small particle size and moderate abrasive properties.
Blowing of ambient air.

(Français) MANCHETTE ABRASION

(Français) UTILISATION :
Absorbe les vibrations importantes.
Faible raideur.
Très bonne résistance à l’abrasion (pas de déflecteur nécessaire).
Alimentaire. Extraction de poussières.
Cimenterie, béton, bois.
Antistatique.

PCN-M

COMPOSITION : PVC film
Thickness 0,7 mm
Non-crushing

USES : Industrial and domestic ventilation.
Middle abrasion, transport of product with low granulometry.
Fine dusts of light-weight materials, vapours.
Conveyance of products of small particle size and moderate abrasive properties.
Blowing of ambient air.